
EDGAR COUNTY FAIR ASSOCIATION
DEMOLITION DERBY RULES & REGULATIONS
FOR STOCK COMPACT CARS AND TRUCKS
1.Any DRIVER under the
influence will be DISQUALIFIED
AND REMOVED from premise and
NO REFUND.
2.Each driver must fill out
an entry form at the back
gate the day of the
derby. Each driver must supply
his or her own car and only
ONE entry per person per
class.
3.Drivers must be
eighteen(18)years or older to enter.
Must have valid driver's
license. (Drivers must be
sixteen(16) years or older
to enter compact class
only. Parents must sign a
waiver form at time of
inspection. Drivers must
show their license at entry
time.)
4.The Association reserves
the right to accept or
reject any or all entries.
5.Only owners or drivers who
sign the release form
will be permitted in the pit
area or on the track.
The driver will receive a
free pit pass upon
registration of car on day
of derby.
6.Any driver or crew member
disobeying the rules will
cause his or her car to be
disqualified. Drivers are
responsible for the action
of their crew.
7. Contestants of the derby
cannot be Superintendents
of the Edgar County Fair
Demolition Derby.
8.The Fair Association will
not be held responsible
for any cars, parts, or
other personal property
before, during, or after the
show.
9.Alcoholic beverages WILL
NOT BE ALLOWED in the
infield area. Alcohol will be searched for and
confiscated of site. Anyone caught with alcohol on
the fairgrounds will be
removed and no refunds will be
made.
10.Infield and pit speed
limit will be enforced. No
hot rodding, donuts, or
other unsafe driving will be
tolerated. These practices can be grounds for
disqualification with entry
fee forfeited.
11.Any altercations between
drivers and crews or
drivers, crews and officials
will be grounds for
disqualification and
possibly barred from future
derbies. We have a good show at Paris,IL.--let's keep
it that way.
12.CONTESTANTS ARE TO USE
THE NORTH FAIRGROUNDS
ENTRANCE ONLY.
Any American made hardtop
automobile or station wagon
is allowed. NO trucks, convertibles, hearses, jeeps,
imperials, imperial sub, or
limousines are allowed.
PREPARATION OF CAR
NO IMPERIALS OR IMPERIAL SUBS
1.All glass including
windshield, side windows, rear
windows, head and tail
lights must be removed.
Rolling the windows down is
not permitted. Glass in
car will result in rejection
at tech station.
2.All external molding (ex.
chrome,plastic, metal tail
light lens, bumper guards
and trim) must be removed
before the station or will
be rejected.
3.Any sharp protruding finds
or dangerous objects:
mash down or cut off.
4.Any standard car bumper ,
NO reinforcement,
fabrication or trailer
hitches.
5.Engine mounts are
recommended to be welded solid or
chained down.
6.Radiators must remain in
original position or be
taken off. NO NYLON STRAPS TO HOLD RADIATOR OR ALL
THREAD. NO ANTIFREEZE-WATER ONLY DUE TO EPA
REGULATIONS. IF FAIR BOARD
DISPOSES OF ANTIFREEZE,
THERE WILL BE A $25.00
CHARGE.
7.All doors are to be welded
shut, no chain or bolts.
8.Cages should be secured to
frame on driver's side
ONLY. ONE IN FRONT SEAT AND ONE BEHIND OF
SEAT. MAY
NOT EXCEED 8" IN FRONT
OR BEHIND SEAT.
9.Only one battery, any size
is allowed. All
batteries must be
strapped/bolted to passenger side
floorboards and covered with
protective covering.
10.cutting fenders only for
wheel clearance is allowed
and ends of bumpers may be
cut off. Welding shock on
bumpers is permitted.
11.The hood may be fastened
down in four places.
Sheer bar is required. Trunk or tailgate is fastened
down in four places, with
only THREE (3) strands of
wire through each hole. No chains, bands, bolts,
pins, or tape. Hood and trunk must be open until
inspection has been
completed.
12.FRONT DOORS MUST BE
PAINTED WHITE FOR NUMBERING.
SPECIAL NUMBERS WILL BE
PERMITTED.
13.Original gas tank must be
removed. A marine gas
tank or an approved metal
container is recommended. NO
PLASTIC TANKS ALLOWED! Tank
must be securely strapped
and bolted and covered in
the rear seat area. Maximum
of six (6) gallons of
gasoline per heat. All tanks
must have secure cap and all
lines must be leak proof.
Must have good quality gas lines.
14.Auto must be swept
clean. No junk tires, wheels,
metal parts, broken glass,
etc. allowed in car.
15.It is highly recommend
that driver door be
reinforced inside with steel
bar, angel iron, or pipe.
Length not to extended more than EIGHT (8) inches of
either end of the driver's
door. NO kickers allowed.
16.Hood must have holes on
each side, but not directly
above the carburetor, large
enough to extinguish
engine fires without raising
the hood. Maximum of
EIGHT (8) tie downs, FOUR
(4) on hood and FOUR (4) on
trunk, not to exceed THREE
(3) strands per hole.
17.Tire restrictions are as
follows:
DOT approved, no double tires
No liquids, solids, or foam inside tires(Air
Only)
No studs, chains, or screws
No wheel weights
IF VIOLATIONS FOUND, AUTOMATIC
DISQUALIFICATION-NO MONEY
REFUNDED
18.A strong wire or nylon
mesh screen is recommended
on the driver's window and
windshield area. Plexiglas
is permitted in the driver's
window.
19.All lines must be leak
proof. Must have good
quality gas lines.
20.Transmission coolers are
allowed.
21.Manual kill switch. Will be tested at tech station
if you have electronic fuel
pump system.
22.Frame must be stock for
your vehicle. Factory
holes in frame must not be
covered or plugged in order
to hide materials from
inspection. No materials may
be added that in any way
strengthen frame. Firewall
to remain intact and holes
covered. NO IMPERIAL SUB
FRAMES ALLOWED! NO ALL
THREAD EXCEPT BATTERY, GAS TANK
AND MOTOR MOUNTS ONLY!
23.No flags mounted on car.
24.COMPACT CARS-4 cylinder,
6 cylinder, 102" inch
wheel base maximum. Up to
14" rim and tire allowed.
25.No iron on outside of
cars,neck brace recommended.
PREPARATION OF TRUCK
1.All glass; including windshield,
side windows, rear
window, head and taillights
must be removed. Rolling
down windows is not
permitted. Glass in vehicle will
result in rejection at Tech
Station.
2.All external moldings,ex:
chrome,plastic, metal tail
light lens, bumper guards
and trim must be removed
before Tech Station or will
be rejected.
3.Any sharp protruding finds
or dangerous: mash down
or cut off.
4.Engine mounts are
recommended to be welded solid or
chained down.
5.Radiators must remain in
original position or
removed. NO ANTIFREEZE-WATER
ONLY due to EPA
Regulations.
6.No nylon straps.
7.All doors are to be welded
shut, no chain or bolts.
8.Cutting fenders only for
wheel clearance is allowed
and bumpers may be cut off.
9.FRONT DOORS MUST BE
PAINTED WHITE FOR NUMBERING.
SPECIAL NUMBERS WILL BE
PERMITTED.
10.Vehicle must be swept
clean. No junk tires, metal
parts, broken glass,etc.
allowed in vehicle.
11.EACH DRIVER MUST SIGN IN
AT THE REGISTRATION TABLE
ON THE DATE OF THE SHOW AND
HAVE THEIR VEHICLE
INSPECTED AT LEAST ON HOUR
PRIOR TO SHOW TIME.
12.A strong wire or nylon
mesh screen is recommended
on the driver's window and
windshield area. Plexiglas
is permitted in the driver's
window.
13.No flat,wooden bed. Metal
factory only. Original
factory bumper-No specialty
spring loaded bumpers. NO
UTILITY BEDS.
14.No flags mounted on
vehicles.
15.Stock frame, tailgate
must be welded, seams,-no
reinforcement of tailgate.
16.Stock tires: DOT
approved. No liquids, solids, or
foams inside tires. AIR ONLY No studs, chains or
screws, no wheel weights.
17.Battery securely mounted
and covered in cab area.
18.Original gas tank must be
removed. NO PLASTIC
TANKS. Gas tanks must be
securely fastened in exact,
front center of bed. Must
have steel line from gas
tank to engine compartment.
Must be safely and
securely fastened. Manual
and electric fuel pumps must
have manual shut off and
will be tested. Officials
discretion strictly enforced
on safety for fuel. Six
(6) gallons of gasoline
maximum per heat.
19.can have EIGHT (8) extra
bed bolts, any size.
20.DOT approved solid
wheels-not split rims.
21.Roll cage- four corners,
securely attached to
frame.
22.The cab solid to frame
and securely fastened to
frame.
23.No reinforcement of
frames. Inspection holes must
not be covered or plugged in
order to hide foreign
materials from inspecting.
No materials may be added
that in any way strengthen
the frame. Firewalls to
remain intact and hole
covered.
24.All doors must be WELDED
and painted white.
Driver's door recommended to
be reinforced with steel
bar, angle iron or pipe.
Length not to extend more
than EIGHT (8) inches on
either end of driver's door.
25.Bumpers are to be
securely welded.
26.Hood fastened down in
four (4) places. Hood latch
removed. Must have sheer
bar. Three(3) strands of wire
in each tie down. Nine wire
only.
27.No running boards.
28.Large enough holes on
each side, but not directly
above the carburetor, large
enough extinguish engine
fire without raising hood.
29.Brakes must be operable
prior to event.
30.Neck brace recommended
but not required.
31.CANNOT BEND REAR QUARTER
PANELS BEHIND REAR TIRES.
RUNNING RULES
1.Safety belts, Z-90
approved helmets, goggles, or
face shield are REQUIRED.
2.No DELIBERATE head-on
collision and no DELIBERATE
hitting in the DRIVER'S
DOOR. TRACK JUDGES DECISION
IS FINAL.
3.Vehicles must have
dependable brakes at all times
and boundaries must be
observed. Brakes operable
prior to event.
4.NO DRINKING OF ALCOHOLIC
BEVERAGES ON THE TRACK OR
IN THE INFIELD. ANY DRIVER OR PIT PERSON UNDER THE
INFLUENCE OF ALCOHOL OR
DRUGS WILL BE IMMEDIATELY
DISQUALIFIED AND REMOVED
FROM THE GROUNDS.
5. No cars are allowed in
the competition area before
the heat in which they are
to participate.
6.A vehicle WILL BE
disqualified if the drivers door
comes open during the heat.
7.One-minute time limit will
be strictly enforced for
restarts. A contestant "on the clock" must
make a hit
in one minute or be
disqualified. All judges are
equipped with stopwatches
and their decision is FINAL.
NO SAND BAGGING WILL BE
TOLERATED.
8.All cars are to be removed
from Fairgrounds
following the show or they
will become property of the
Association and the
officials will have them removed.
A removal deposit may be
required.
9.A $50.00 protest fee is
required to contest another
car BEFORE event
begins. Money goes to the Edgar
County Fair Association.
10.Boundaries must be
observed at all times. Any car
shoved or driven out of
bounds may be immediately
disqualified if derby
officials feel that it is a
safety hazard.
11.All Cars and trucks can
be re-inspected at any
time.
THE DERBY WILL BE COMPOSED
ON INDIVIDUAL HEATS AND ONE
FEATURE WITH CASH GOING TO
THE TOP THREE OF EACH HEAT
AND THE GRAND PRIZE GOING TO
THE WINNER OF THE
FEATURE.
Let's try to keep this Derby
peaceful, and try not to
"trash" the
grounds, so we can keep having a
Demolition Derby at Paris in
years to come.
DECISIONS OF OFFICIALS ARE FINAL
RACE DAY
RACE DAY: SATURDAY JUNE 11,2005
RACE TIME: STOCK--6:00P.M.
ENTRIES OPEN AT 12:00 NOON
AND CLOSE AT 5:00P.M.
ENTRY FEE: $35.00 FOR EACH CLASS
(STOCK, COMPACT,TRUCK)
PURSE:
FEATURE PAYS: $1,400;$800;$500
HEAT PAYS: $50 TO TOP FOUR PLACES
COMPACT A PAYS: $600;$350;$250
COMPACT B PAYS: $600;$350;$250
TRUCK: $500;$300;$200
_______________________________________________________
FAIR DERBY
RACE DAY: SATURDAY-JULY
30,2005
RACE TIME: STOCK-6:00 P.M.
ENTRIES OPEN AT 12:00 NOON
AND CLOSE AT 5:00 P.M.
ENTRY FEE: $35.00 FOR EACH CLASS
(STOCK,COMPACT,TRUCK)
FEATURE PAYS: $1400;$800;$500
HEAT PAYS: $50 TO TOP FOUR (4) PLACES
COMPACT A PAYS: $600;$350;$250
COMPACT B PAYS: $600;$350;$250
TRUCK PAYS: $500;$300;$200
COMPACT TRUCK: 80% PAYBACK
THERE WILL BE A 50/50
DRAWING AT BOTH EVENTS
PIT PASSES $10.00 PER PERSON
FOR EACH EVENTS
SUPERINTENDENT: TIM BRINKERHOFF
(217)466-0566
(AFTER 8:00PM)
JIM KNIGHT
(217)465-3014
(AFTER 5:00PM)
|
![]() |
![]() ![]() ![]() ![]() |
![]() |
![]() |